OBDSTAR MP001 Multi-Function Programmer for OBDSTAR P50, DC706, X300 Classic G3, MS80

-Liquid error (snippets/product-label line 55): Computation results in 'NaN' (Not a Number)%

Zoom the image with the mouse

OBDSTAR MP001 Multi-Function Programmer for OBDSTAR P50, DC706, X300 Classic G3, MS80

VXDAS Official Store

2 sold in last 8 hours

243 customers are viewing this product

Description

OBDSTAR P001 Programmer with ECU Bench Jumper for OBDSTAR P50, DC706, X300 Classic G3, MS80.

P001 programmer on the basis of original adapter features,integrated with the EEPROM adapter, RFID adapter and Key Renew adapter, is a multifunctional programmer.

OBDSTAR MP001 Programmer+C4-01 Host + W004/W005/W006/ECU Bench Jumper:

MP001 is the latest multifunctional programmer developed by OBDSTAR, which fully supports data read/write, clone, data processing functions for automotive, commercial vehicle, new energy vehicle, motorcycle, marine (jet-ski).

Compatible with OBDSTAR DC706, P50, MS80 and new X300 Classic G3.

OBDSTAR MP001 Programmer Software Function:

EEPROM/MCU reading and writing
Key flashing
Steering angle repair
Body computer data processing
Immo off
Pincode reading
Battery module repair
Instrument repair
more functions are under development

Note:

MP001 has P003+, P003, P002 functions.

Different tablet device models require different configuration software.

Recent OBDSTAR software update that requires MP001:
OBDSTAR MS80/ MK70/ iScan Yamaha add Yamaha proximity 12-pin, 18-pin, support program via P003+ or MP001 Programmer

OBDSTAR MP001 Multi-Function Programmer Features:

1. MP001 is compatible with the function of the P002 adapter (TOYOTA/FORD all keys lost adapter, HONDA/YAMAHA/SUZUKI all key lost adapter) and P003/P003+ adapter (some models of engine/transmission clone K/CAN conversion, BOOT mode read/write).

2. MP001 can replace P003, P002 adapter as well.

3. When use MP001 with DC706, just plug it in and the 706 will update the firmware then upload what it needs to configure the MP001 for whatever ECU you are connecting to. All automatic.

4. When read and write Chrysler GPEC2 ECM etc, MP001 does not require a 120ohm resistor between CAN H and CAN L wires, P003/P003+ does need it.

6. Only when write R7F701A033/R7F7010643 airbag ecu data, you need MP001 with P50.