2023 ECUHELP KT200 ECU Programmer Support OBD / BOOT / BDM/JTAG Multiple Protocols Full Version with offline workstaion
KT200 ECU Programmer is a complete tool for reading and programming ECU (engine control units) and TCU via OBD/Bench/Boot mode, the BDM/Jtag systems are also available. 

KT200 offline workstation 

ECUHELP KT200 offline workstation. No need to connect to internet. Just plug the USB dongle (as shown), the KT200 reads and writes the ECU /TCU via OBD/Bench/Boot/BDM/Jtag as perfectly as KT200 online version.
KT200 offline workstation is friendly for the outdoor ECU tunning where the internet is not accessible or the signal is too weak to connect. KT200 offline workstation makes ECU tunning easier. 
Please be informed: even with the USB dongle, your KT200 still need to connect to the KT200 online server once every 15 days.

How to install

1. Run setup to install KT200 software.
2. The software want to work offline, you have to build a local server,and please make sure the C drive has more than 15GB of space available. Open the KT200_ftp folder, run offline installation.
3. Run KT200 to work.



Notice

1. Please note: KT200 offline workstation works with KT200 Full Version only. If your device is Auto version, please upgrade to full version first. 
2. If you have KT200 Basic Version Only, please contact us to pay $179 to update to Full Version, then you can work with the Offline Station too.


How To Install KT200 New Software?
Step 1: Download the kt200 service and installation package, Unpack the packages and complete the installation.
Step 2: Connect the device, open the  "Device manager" in your computer and manually install the device driver. After completion, open the kt200 service
Step 3. Click " download  software" in kt200 service to install the KT200 work software, it will automatically update the newest version, and wait for the installation.
Step 4. Click the "Wiring diagram "to download (this has all the wiring picture the device supported), and it will automatically download and complete the installation.
Step 5. After completing software download, You can open the software normally. And after downloading the Wiring diagram, you can do the ecu work normally.
Step 6. When the software cannot be opened, you can click the "Diagnosis" button in KT200 service software first for detection.
 
KT200 New Software Free Download:
Free Download KT200 02/01/2023 Software Online
Free Download KT200 02/01/2023 Software Offline
Free Download KT200 22.12.10 Software

KT200 2022.12.10 new update
NEW AUTOMATIC FUNCTION: TRICORE CLONE
Added automatism to clone the following control units with OTP zone adaptation and password:
– BRP Can-Am ME17.8.5
– BMW MED17.2
– BMW MEV17.2
– MINI MED17.2
– MINI MEV17.2
– MERCEDES BENZ EDC17 CP01
– OPEL EDC17 C84
– OPEL EDC17 C42


Master: Read and write ECU data, read it in BIN unencrypted format, you can modify the data arbitrarily, you can clone ECU and use it as ECU service, the master is a personal version, you can only use it yourself, cannot unlock data for the slave.
Free Download KT200 wiring diagram
Get free VR file in this software ECUHelp V3.0
Download patch if some protocols not found after update, then follow Update video guide

Operating system
Windows 7
Windows 8/8.1
Windows 10
Windows 11

Notice:
1. Please close the anti-virus program before you run the KT200 software, it may incorrectly identify the software as harmful and break it.
2. When connecting the dongle, it can be offline, if disconnect the dongle, please connect to the Internet to work with KT200 software, otherwise, it will not work.
3. We provide the following ECU service: DTC code Removal EGR & DPF Removal, IMMO OFF, releasing speed limit, mileage correction, Hot start or Cold Start Vmax, and so on.

KT200 ECU Programmer Multiple Connection

KT200 ECU Programmer Features:
1. KT200 ECU Programmer covering up to 5400 ECU, and over 500 TCU.
2. Support Audi/VW ECU Clone via Bench Mode pinout.
3. Bosch EDC17, MED17/ME17, and SIEMENS Pcr2.1(with Pinout also unlocking possibility) read and write in Bench Mode.
4. ECUHELP KT200 ECU Programmer Vehicle list is constantly updated and stays ahead of the industry.
7. The KT200 ECU programmer software allows you to forcibly write (forcible clone) without checksumming and supports forcibly reading and writing unknown ECUs with supported chip models.
8. Covering a full range of German, ECU Programmer, Japanese, American, and Chinese models.
9. Software Update: Update online free lifetime. No subscription, No annual Fee.

Function

Covering a full range of German, ECU Programmer  Japanese, American and Chinese models
EGR & DPF Removal, IMMO OFF, releasing speed limit , mileage correction, Hot start or Cold Start Vmax, and so on.
The list of vehicles is constantly updated, which keeps you at the forefront of the industry.
Support Volkswagen Audi clone (local operation without sending data to manufacturers)
ECU maintenance, Chip tuning, DTC code Removal, professional reading and writing equipment covering 99% of the models in the market.

KT200 Full Version Software includes 10 licenses:
Car OBD, Truck OBD, Tractor OBD, Boat OBD, Motorbike OBD, Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gearbox

What is the ECU service?
ECU service includes 2 major items:

1. Chip tuning.
Chip tuning is to improve engine performance by modifying the data read out by the equipment. The data is divided into: Stage 1 data, Stage 2 data, and Stage 3 data.

2. ECU maintenance.
ECU maintenance data is to repair software errors in the ECU and some identity data of the ECU by modifying the data read by the device. We provide the following items:DTC code Removal


KT200 has 2 version

1. Car version (Auto version): Car OBD, Truck OBD, Full System, BDM/JTAG, TOOL BOOT, Bench Mode, TCU Gear

2.Full configuration version: Car OBD, Truck OBD, Tractor OBD, Boat OBD, Motorbike OBD, Full System, BDM/JTAG , TOOL BOOT, Bench Mode, TCU Gear,

You can update Auto Version to be full version, provide S/N and order update service:

	Master Version	Full Version
Car OBD	√	√
Truck OBD	√	√
Tractor OBD	×	√
Boat OBD	×	√
Motorbike OBD	×	√
Full System	√	√
BDM/JTAG	√	√
TOOL BOOT	√	√
Bench Mode	√	√
TCU Gear	√	√

Professional software for reading and programming the control units of:
CAR
TRUCK
MOTORBIKE
TRACTOR
BOAT
Additional TCU package available for Automatic Transmissions
 

Full Read And Write Via Pin Out in Bench Mode: BOSCH EDC7 BOSCH EDC16 BOSCH ME9 / MED9 BOSCH MD1 BOSCH MG1 -FREESCALESPC5777 -AURIXTC29x -STSPC58 BOSCH EDC17 BOSCH MED17 / ME17 SIEMEN SPCR2.1 (Unlocking also possible via pinout)	Full System Via Pin Out (Micro / Flash + EEPROM)of ECUs: BOSCH CONTINENTAL DELCO DENSO MARELLI SIEMENS TEMIC TEMIC	BDM EJTAG Modes For: BDM MPC55x BDM MPC56x BDM MC32 / ZC32 BDM HC12 / S12x JTAG NEXUS MPC / SPC56xx JTAG NEXUS MPC55xx
JTAG RENESAS: SH7055 SH7058 SH7059 SH7251 SH72543 SH72544 JTAG NEC76F00xx 76F0038AGD 76F0038GD 76F0039AGD 76F0039GD 76F0040GD 76F0070 76F0070 76F0085	BOOT MODEC16729Fxxx: BOOT MODE ST K-LINE / RX-TX / CAN ST10F168 ST10F269 ST10F273 ST10F275 ST10F276 ST10F276 ST10F280 ST10F296	BOOT Mode Tricore for micro: TC1724 TC1728 TC1738 TC1738 TC1762 TC1766 TC1767 TC1782 TC1791 TC1792 TC1793 TC1793 TC1796 TC1797
BOOT Mode Renesas: SH7052 SH7054 SH7055 SH7055 SH7058 SH7059 SH7251 SH72543 SH72544	BOOT Mode Mitsubishi: MH7202 MH7203 MH8102F MH8105F MH8106F MH8202 MH8206F MH8301F MH8301F MH8304F MH8405F	BOOT BAM System MOTOROLA: SPC5674 SPC5777 -BOOT MODE Fujitsu -BOOT MODE Hitachi

Additional Package For Automatic Transmission
Full Read And Write TCU(MICRO + EEPROM)
TCU CLONING
TCU CODING FUNCTIONS

Package Include
1pc x Master
1pc x BENCH box
2pcs x OBD wires
1pc x pinout line
4pcs x BOM adapters
3pcs x Transfer cables
4pcs x Power wire
1pc x Set of resistors
4pcs x Adapter plugs
5pcs x Power adapters
1 x offline workstation